9.600 l/h mit Vorfilter. Item dimensions L x W x H. 59 x 48 x 43 centimetres. 59 x 48 x 43 cm; 10 Kilograms. SF96K sand filter system with pre-filter.Keep your pool permanently clean with the particularly powerful SF96K from na The system ensures clean and clear water. The MZPP15 pump included in the set creates 9,600 l/h. Integrated pre-filter and secure stand. The integrated pre-filter ensures that coarse dirt is filtered out before the flow of the tank. The pre-filter is also suitable for adding chlorine tablets. The sturdy base of the filter system ensures a firm and secure stand. This offers the following adjustment. Backwash - cleans the filter rinsing - causes residual cleaning and compaction of the sand basin filtering - adjustment for normal operation winter - recommended position in winter. TÜV Rheinland - GS tested safety.
The sand filter system is TÜV Rheinland - GS tested safety. To be found under the product group: MZPPModel Number: MZPP15. The system has the protection class IPX5 - splash-proof.Flow rate: 9,600 l/h. The pump promotes 9,600 litres of water per hour and is therefore particularly suitable for large swimming pools thanks to the high flow rate. By default, SF96K has a drain valve. At the end of the season or for other purposes, the drain valve is used for uncomplicated emptying of the tank.
In addition, the valve has a filter sieve, so as much filter sand as possible remains in the kettle and only the water drains away. A water drain plug is also located on our pre-filter. Our sand filter models have a standard 2-in-1 connection for swimming pool hoses. Diameter: 1¼ inches = 32 mm, diameter: 1½ inches = 38 mm. If you use swimming pool hoses with a 1½ inch connection, you can cut our adapter to the appropriate hose size to ensure maximum flow.
Suitable for all standard sand filter types. Our sand filter system can be filled with the most common sand filter types.
Filter sand (quartz sand) filter balls filter glass. Please note: When using filter balls, no backwash must be carried out with our filter system. The robust tension ring connects the filter boiler to the handy 4-way valve. The screwable stainless steel pipe clamps ensure maximum hold of the connection pipe (please note: do not tighten too tightly, they are very strong).In addition, the sand filter system SF96K is suitable for salt water pools. Sand filter system, pre-filter, operating instructions (English language not guaranteed). Please note: The sand is not included. We recommend the disassembly of the system in winter.
In the event of risk of frost. The connection pipe between the tank and pump is located in the pipe of the boiler of the sand filter system. Please remove it before operating, and connect it to the intended place.The filling aid, must be removed after filling the sand filter system. Base for sand filter boiler and motor. This item is in the category "Garden & Patio\Swimming Pools, Saunas & Hot Tubs\Pool Equipment & Parts\Pool Pumps". The seller is "jcbelectronics-6" and is located in this country: PH. This item can be shipped to United Kingdom.